Rub on transfers are a type of decal that can be applied to various surfaces such as wood, metal, glass, ceramic, fabric and more. They are made of a thin layer of adhesive film with a printed design on top. To use them, you need to peel off the backing paper, position the transfer on your desired surface, rub it firmly with Aussie’s transfer tool and then peel off the clear top layer. The design will be transferred to the surface with a smooth and seamless finish.
Watch here for more info.
Les transferts par friction sont faciles à utiliser et ne nécessitent aucune compétence ni équipement particulier. Ils peuvent transformer vos meubles et vos projets d'artisanat avec des designs magnifiques et détaillés qui ressemblent à des œuvres d'art peintes à la main. Ils sont également durables, car ils adhèrent bien à la plupart des surfaces et peuvent être scellés avec une couche de finition pour une protection supplémentaire. Les transferts à friction peuvent également être superposés, vieillis, poncés ou cirés pour créer différents effets et styles.
La taille et la conception des transferts à friction dépendent de vos préférences personnelles et du type de projet sur lequel vous travaillez. Vous pouvez choisir parmi une variété de tailles, des petits accents aux grands autocollants pour meubles.
Attendere almeno 24 ore dopo aver dipinto qualsiasi pezzo per applicare i trasferimenti decorativi. Questo è un MUST! Se provi a far aderire uno sfregamento sul trasferimento alla vernice semi-asciutta, il trasferimento non aderirà correttamente e potresti danneggiare il tuo progetto.
Assicurati che la superficie sia pulita. Rimuovere eventuali residui di detergente in modo che il trasferimento aderisca correttamente.
Utilizzare del nastro adesivo da pittore o del nastro adesivo per fissare il foglio di trasferimento trasparente in posizione prima di iniziare a strofinare in modo che il foglio rimanga saldamente in posizione.
Lavorare in sezioni e staccare gradualmente l'acetato trasparente mentre si strofina il transfer sulla superficie.
I transfer sono delicati, quindi staccare il foglio di acetato trasparente lentamente e con attenzione, controllando la presenza di eventuali bolle d'aria o punti mancanti.
Se trovi bolle d'aria o punti mancanti, rimetti lo strato superiore trasparente e strofina di nuovo fino a quando il.
transfer non è completamente aderente.
Se vuoi sporcare o carteggiare il tuo trasferimento, fallo delicatamente e leggermente per evitare di danneggiare il disegno.
Sigillare il trasferimento con una mano di finitura a base d'acqua. Aussie Décor Transfers sconsiglia l'applicazione di cera per sigillare il trasferimento, poiché la cera può contenere derivati del petrolio che influenzeranno il colore del design del trasferimento. Se vuoi applicare la cera al tuo progetto, fallo sopra un top coat a base d'acqua.
Guarda qui per maggiori informazioni.
Vous devez conserver vos transferts à friction dans un endroit frais, sec et sombre, à l'abri de la lumière directe du soleil, de la chaleur et de l'humidité. Vous devez également les conserver dans leur emballage d’origine ou dans un sac en plastique pour éviter que la poussière et la saleté ne les endommagent. Évitez de plier, de plier ou de froisser vos transferts, car cela pourrait affecter leur qualité et leurs performances. Il faut également les manipuler avec précaution car les transferts sont fragiles, et éviter de toucher la face adhésive avec les doigts.
Sì, puoi usare lo sfregamento sui trasferimenti su superfici curve o irregolari, come sedie, lampade, vasi o bottiglie. Tuttavia, potrebbe essere necessario utilizzare alcuni passaggi e strumenti aggiuntivi per garantire un'applicazione fluida e uniforme. Ad esempio, puoi usare un asciugacapelli o una pistola termica per riscaldare il trasferimento e renderlo più flessibile e flessibile. Puoi anche tagliare il trasferimento in pezzi più piccoli o forme che si adattano meglio alla tua superficie. Una volta aderito, utilizzare un panno morbido per premere e lisciare il trasferimento in modo deciso e uniforme sulla superficie.
Guarda qui per maggiori informazioni.
Oui, vous pouvez peindre sur des transferts si vous souhaitez créer un effet ou un style différent. Il faudra cependant attendre au moins 24 heures après l'application du transfert avant de peindre dessus. Vous devez également utiliser une peinture à l’eau ou acrylique compatible avec votre support et votre transfert. N'utilisez pas de peinture à base d'huile ou en aérosol, car elles pourraient endommager ou dissoudre le transfert. Appliquez la peinture en couches fines et uniformes et évitez de frotter ou de rayer le transfert.
Pour retirer un transfert de votre surface, vous devrez utiliser un solvant ou une source de chaleur pour décoller l'adhésif. Vous pouvez utiliser un produit tel que Goo Gone ou Un-Du pour dissoudre l'adhésif et décoller le transfert. Vous pouvez également utiliser un sèche-cheveux ou un pistolet thermique pour réchauffer le transfert et le gratter avec une carte en plastique ou un grattoir. Vous devez faire attention à ne pas endommager votre surface ou vous brûler lorsque vous utilisez ces méthodes.
Sì, puoi sovrapporre i transfer per creare un design più complesso e interessante.
Guarda qui per maggiori informazioni.
Pour protéger vos transferts, vous devez utiliser une couche de finition transparente à base d'eau pour les sceller après les avoir appliqués et avant d'utiliser toute autre finition, y compris la cire. Vous devez également éviter d’exposer vos transferts à la lumière directe du soleil, à la chaleur, à l’humidité ou à des produits chimiques qui pourraient les endommager.
Uno sfregamento sul trasferimento non aperto nel tubo può durare per 12 mesi se conservato correttamente. Dovresti conservare il tuo rub on transfers in un luogo fresco, asciutto e buio, lontano dalla luce solare diretta, dal calore e dall'umidità.
Dovresti anche conservarli nella loro confezione originale o in un sacchetto di plastica per evitare che polvere e sporco li danneggino. Evita di piegare, piegare o sgualcire lo sfregamento durante i trasferimenti.
Dopo 12 mesi, l'adesivo potrebbe iniziare a seccarsi durante il trasferimento. Questo accade a tutte le marche di trasferimenti. Se hai un trasferimento come questo, non tutto è perduto! Aussie Décor dispone di un flacone spray ad azione a pompa di un "attivatore adesivo" specializzato per i trasferimenti secchi. Basta spruzzarlo sul retro del foglio di trasferimento e lasciarlo asciugare per alcune ore fino a quando l'adesivo non è chiaro e appiccicoso. Quindi applichi il tuo trasferimento come di consueto.
Il clima influisce sicuramente sui trasferimenti in qualche modo. Le temperature estreme, l'umidità o la secchezza possono rendere il trasferimento fragile, appiccicoso o deformato. Dovresti evitare di applicare lo sfregamento sui trasferimenti in condizioni molto calde o fredde, poiché ciò potrebbe influire sull'adesione e sull'aspetto del trasferimento. Dovresti anche evitare di esporre il tuo sfregamento sui trasferimenti alla luce solare diretta, al calore, all'umidità o a sostanze chimiche che potrebbero danneggiarli. Se vivi in un clima umido o secco, potrebbe essere necessario regolare la quantità di pressione e il tempo che usi per applicare il trasferimento.
Vous devez utiliser des ciseaux tranchants et précis ou des outils de coupe tranchants pour couper le papier de découpage.
Pulisci accuratamente la superficie e lasciala asciugare completamente prima di applicare la carta da decoupage.
Aussie Décor Transfers consiglia il metodo "applicazione a umido". Puoi guardare un video che mostra questo metodo sul nostro sito web nella sezione decoupage. Avrai bisogno di colla o mezzo di decoupage come il top coat, un flacone spray a nebbia lunga che troverai nella nostra collezione di accessori e, infine, lo strumento PIÙ IMPORTANTE: lo strumento per l'applicazione del decoupage dei bordi in feltro di Aussie. Questo strumento è un MUST.
Lavorare in piccole sezioni ed evitare di creare bolle o grinze.
Una volta applicata la carta, lasciala asciugare per ALMENO 24 ore.
Applica 2 mani di top coat per proteggere la tua carta.
Puoi guardare qui per maggiori informazioni.
Les papiers de découpage Luxe d'Aussie sont un papier de riz hybride et du papier de mûrier sur mesure, conçus et fabriqués à cet effet. Les fils blancs sont de la soie récoltée sur le mûrier. Ces fils ajoutent résistance et stabilité au papier, réduisant considérablement le risque de déchirure. Les fils de soie ajoutent également une dimension tactile et visuelle.
Aussie Decor posters are high quality Poster Prints printed on sturdy Photographic Paper with a satin finish and a water resistant protective film on the front, which makes these posters tear proof and almost indestructible! Not Your Average Poster Print!
Our Aussie Decor Poster Prints can be applied to any hard surface such as furniture, home decor, school or office supplies. To apply our Poster Prints to a hard surface, apply PVA/wood glue or mod podge to the surface you are applying to and also to the back of the poster print. Using our Felt Edged Decoupage Applicator Tool gently but firmly smooth out from the centre outwards any bubbles or excess glue to create a smooth surface that is adhered well.
There are several ways to display your Aussie Decor poster:
Framing: You can frame your poster using a standard picture frame. Choose a frame that complements the poster’s design and fits its dimensions.
Mounting: Use double-sided tape, adhesive strips, or poster putty to mount the poster directly on the wall.
Clipboards or Poster Hangers: Clipboards or specialized poster hangers allow you to easily switch out posters without damaging them.
Poster Rails: These are horizontal rails that hold the top and bottom edges of the poster. They provide a clean and minimalist look.
While Aussie Decor posters are primarily designed for indoor use, some designs may be suitable for covered outdoor spaces. However, prolonged exposure to direct sunlight, rain, or extreme weather conditions may fade or damage the poster.
To keep your poster looking its best:
Remember to check the specific instructions provided by Aussie Decor for each poster, as care and display recommendations may vary based on the design and material.
Yes, Aussie Decor offers posters in various sizes. Check the product descriptions or website for specific dimensions. You can choose a size that fits your chosen project.
Follow Aussie Decor Transfers on social media and join our Aussie Decor Transfers Creative Club for project ideas, tutorials, and inspiration. You’ll discover endless possibilities for using our Poster Prints in your art projects and home decor.
They are PVC vinyl prints that are extremely robust and hardwearing. They can be applied to tabletops and other furniture surfaces that sustain high traffic use. They have adhesive backing that can be peeled and stuck to any smooth surface. They come in various designs and sizes to suit your preference.
Our Aussie Decor Peel & Stick Vinyl Prints can be applied to any non porous surface such as glass, furniture, home decor, school or office suppplies.
You need to clean the surface where you want to apply the print and make sure it is dry and dust-free. Apply a water based clear coat to seal any porous surface such as timber, chalk painted furniture, leather, etc and allow to dry as recommmended.
To start, peel back the backing paper from the print slightly and position it on the surface. Using our Felt Edged Decoupage Applicator Tool gently but firmly smooth out from the centre outwards any bubbles to create a smooth surface. Peel the backing sheet off slowly as you go working out any bubbles or wrinkles. Trim off any excess material with a sharp knife or scissors. For a how to video on applying our Peel & Stick Vinyl Prints, click on any of the listings under Peel & Stick Vinyl Prints to watch the easy to follow video.
Once applied, seal any edges and cuts with a water based clear coat.
You can peel back the print from the surface by lifting one corner and pulling it up slowly and gently, to readjust and remove wrinkles and air bubbles as you apply it to your project.
You can wipe the print with a damp cloth or a mild water based cleaner to remove any dirt or stains. Do not use any abrasive or harsh chemicals that may damage the print. Avoid exposing the print to direct sunlight or extreme temperatures that may cause fading or cracking.
Yes, Aussie Decor offers Peel & Stick Vinyl prints in various sizes. Check the product descriptions or website for specific dimensions. You can choose a size that fits your chosen project.
Follow Aussie Decor Transfers on social media and join our Aussie Decor Transfers Creative Club for project ideas, tutorials, and inspiration. You’ll discover endless possibilities for using our Peel & Stick Vinyl Prints in your art projects and home decor.
L'uso di uno stencil extra large sui mobili può aiutarti a creare design straordinari e unici che coprono un'ampia area del tuo mobile senza dover spostare e riposizionare lo stencil per ottenere un motivo ripetuto continuo.
Uno stencil XL appositamente progettato per i mobili può creare un punto focale, un motivo di sfondo, o un effetto bordo sui tuoi mobili. Puoi anche usare lo stencil per creare un look coeso per il tuo set di mobili ripetendo lo stesso disegno su pezzi diversi.
Per ulteriori informazioni, qui.
Avrai bisogno di nastro adesivo da pittore o nastro adesivo, così come un metro a nastro o un righello per assicurarti che la posizione dello stencil sia diritta.
Puoi anche usare un adesivo spray a bassa aderenza invece del nastro adesivo per fissare il tuo stencil.
Guarda qui per maggiori informazioni.
Il existe un certain nombre de façons différentes d'éviter les saignements lors de l'utilisation d'un pochoir, mais la règle la plus importante à retenir est de décharger votre pinceau, votre éponge ou tout autre outil d'application de peinture. Vous pouvez décharger la peinture sur votre palais de peinture, avec un chiffon ou une serviette en papier.
Yes! Our stencils are made from thick mylar which is perfect for medium application to create a raised 3D pattern.
La polvere di mica è una polvere fine e luccicante che proviene da un minerale naturale chiamato mica. La polvere di mica è disponibile in una serie di varietà diverse, tra cui perlescente, metallica, iridescente e olografica. Producono tutti effetti molto distinti.
La polvere di mica può aggiungere brillantezza e dimensione a progetti di artigianato, arte e arredamento. Può essere usato come colorante, vernice o potenziatore di texture.
La polvere di mica può essere miscelata con diversi mezzi, come resina, vernice, colla, cera e altro ancora.
La quantità di polvere di mica di cui hai bisogno dipende dal tipo di progetto, dal mezzo che stai utilizzando e dall'effetto che vuoi ottenere. Una regola generale è quella di iniziare con una piccola quantità di polvere di mica (circa 1 cucchiaino) e aggiungerne altra se necessario. Puoi anche usare una bilancia per misurare l'esatta quantità di polvere di mica di cui hai bisogno. Ad esempio, per i progetti di resina epossidica, è possibile utilizzare circa 5 grammi di polvere di mica per 100 grammi di resina.
Guarda qui per maggiori informazioni.
Il existe différentes manières d'appliquer de la poudre de mica sur votre projet en fonction du support que vous utilisez et de l'effet que vous souhaitez créer. Certaines méthodes courantes sont :
Guarda qui per maggiori informazioni.
La poussière de mica d'Aussie est de qualité cosmétique et peut être utilisée en toute sécurité pour vos projets. Cependant, certaines précautions doivent être prises lorsque l'on travaille avec de la poudre de mica. La poudre de mica est très fine et peut être inhalée ou ingérée si elle n'est pas manipulée correctement. Par conséquent, vous devez porter un masque et des gants lorsque vous travaillez avec de la poudre de mica et éviter tout contact avec vos yeux et votre bouche. Un espace de travail bien ventilé est préférable.
Utilizzare sempre tutte le precauzioni quando si utilizza la resina come raccomandato dal produttore della resina.
Wonderfoils are innovative decorative transfer sheets designed for various artistic and creative projects. They come in a range of stunning designs and can be applied to different surfaces.
Applying Wonderfoils is easy! Apply the Wonderfoil Size Glue to the desired area and allow to tack up. This can take 15 to 20 minutes or more depending on room temperature. Use a burnishing tool such as a stiff artist brush or anything that has a textured hard surface to it, to transfer the foil onto the surface. The result is a beautiful metallic or holographic effect.
Wonderfoils adhere well to smooth surfaces like wood, glass, ceramics, and canvas. They can also be used on fabric, paper, and other creative projects. Make sure the surface is clean and dry before applying the Wonderfoil Size Glue (allow to tack up) and then your desired Wonderfoil.
Yes! To protect the design and enhance durability, apply a clear water based sealant over the Wonderfoil transfer. This will help prevent scratches and ensure longevity.
Unfortunately, Wonderfoils are not reusable. Once applied, they become a permanent part of your project. Make sure to choose your design carefully before applying.
Absolutely! Get creative by layering different Wonderfoil designs to achieve unique effects. Experiment with colors, patterns, and textures for stunning results.